Moldcare RI Ⅱ
Clinical Restraining brace for the
Head, Neck, Chest,
Trunk and Pelvic regions
What is Moldcare?
Moldcare RI Ⅱ is a customized patient immobilizing brace designed
with state of the art modeling techniques for optimum speed and
accuracy.
The maintenance of the patient's ideal posture can be significantly
improved during radiotherapy.
- Individually customized positioning of patient's posture during radiotherapy can be achieved with maximum accuracy and the failure in the adjustment of the irradiation field can be prevented.
- Moldcare RI Ⅱ is made of low specific gravity base material and can be used in dose distribution measurements through CT simulation and therapeutic procedures.
- By carefully adjusting the temperature and quantity of water applied Moldcare RI Ⅱ can be modeled according to each patient's condition.
Moldcare RI II is effective in supporting patients with
contracture, which is an ailment characterized by the inability to maintain one's posture.
Moldcare RI II is a patient immobilization cushion widely known in the world.
Moldcare RI II is manufactured in Japan and exported to more than 55 countries through Alcare partners in various countries.
Benefits of Moldcare
-
Patient posture-adjusting material
The superior base material enables accurate modeling of the patient's posture.
-
Reduction of labor time
This revolutionary new patient immobilizing device requires little time or space to set up.
-
Improvement of patient's
Quality Of LifePatients are provided with a comfortable and secure fit which reduces discomfort during treatment.
-
High permeability for radiation
It can be used during treatment with a CT simulator as it has a high permeability to radiation.
-
Volume reduction of
waste productsAfter use to facilitate disposal, the size of the Moldcare RI Ⅱ can be reduced by use of an autoclave.
-
MR Safe
Moldcare RI Ⅱ is MR Safe. Moldcare RI Ⅱ can be safely taken into any MRI environment.
The Video Slideshow of Moldcare Processing ...
Posted:December 8, 2022
Categories:Promotional Materials
This is a one minute video slideshow which shows how to quickly and easily activate Moldcare for ...
Continue Reading
More
Languages Available
for Moldcare Processing Procedure
Typical time taken to prepare Moldcare RI II- HN (from water spraying to setting)
- * The data shown above are based on our measurements, and the time of preparation varies depending on the conditions (ambient temperature, water temperature, etc.).
- * The above graph refers to the time for preparation of Model HN using water spraying. Preparation of Model BR takes 16 to 22 minutes for water spraying to mold setting after release of the patient and the device has to be left at rest for approximately 20 minutes until it can be applied for radiography.
Type and Specification of Moldcare
Moldcare RI II
Patient Immobilization Device
-
HN0.5
-
HN1
-
HN2
-
HN E
-
HN C
-
HN TR
-
HN UT
-
HN S
-
BR 1
-
BR 3
| Product Name | Type | Product Code No. | Specification | Contents Per Pack |
|---|---|---|---|---|
| Moldcare RI II-HN | 0.5 | 93066 | 20cm x 15cm | 1 pce |
| 1 | 93741 | 20cm × 25cm | 1 pce | |
| 2 | 93742 | 20cm × 45cm | 1 pce | |
| E | 94512 | Upper Base: 7cm Lower Base: 20cm Height: 34cm |
1 pce | |
| C | 95942 | Upper Base: 12cm Lower Base: 20cm Height: 35cm |
1 pce | |
| TR | 94232 | Trapezoid shape Upper Base: 5cm Lower Base: 58cm Height: 65cm |
1 pce | |
| UT | 94521 | Upper Base: 20cm Lower Base: 58cm Height: 47cm |
1 pce | |
| S | 95941 | Upper Base: 30cm Lower Base: 58cm Height: 55cm |
1 pce | |
| Moldcare RI II-BR | 1 | 93821 | 40cm × 60cm | 1 pce |
| 3 | 93822 | 60cm × 60cm | 1 pce |
【販売名】モールドケア RI II-HN / モールドケア RI II-BR
一般医療機器 / 医療機器届出番号：13B1X00207000032 / 13B1X00207000031