MOLDCARE "MR Safe" Evaluation Results
The use of MR-Linac Systems for delivering Radiation Therapy treatment is continuing to grow in popularity worldwide. This has led to an increase in demand for ...
Technical Information
-
-
MOLDCARE in Radiation Therapy for Pancreatic Cancer
November 16th was World Pancreatic Cancer Day.Pancreatic cancer is a leading cause of cancer death in the U.S. and worldwide.Early detection of pancreatic cance...
-
The Webinar Video and Summary of "Use of & Experience with Moldcare"
The webinar "The Importance of Customisable Support in Head and Neck Cancer Radiotherapy, Use of & Experience with Moldcare" was hosted by MIS Healthcare on...
-
Moldcare contributes to the accuracy, reproducibility and effectiveness of proton therapy
This is a Case Report from California Protons Cancer Therapy Center in the U.S.California Protons Cancer Therapy Center is a long-standing proton therapy facili...
-
Moldcare is very useful in the head and neck setting and helpful to eliminate the gap
This is the Demonstration Part of the webinar video "The Importance of Customisable Support in Head and Neck Cancer Radiotherapy, Use of & Experience with M...
-
Moldcare cushion provides an extra level of conformity to the neck when required
This is the Introduction Part of the webinar video "The Importance of Customisable Support in Head and Neck Cancer Radiotherapy, Use of & Experience with Mo...
-
The Video Slideshow of Moldcare Processing Procedure
This is a one minute video slideshow which shows how to quickly and easily activate Moldcare for patient use. Moldcare Video Slideshow is available in the follo...
-
Evaluation of Moldcare for Head and Neck Cancer Patients
This is a Moldcare evaluation from one NHS (National Health Service) hospital in U.K. This site evaluated the effectiveness of three different immobilisation he...
-
Moldcare User Review
This is a Moldcare User Review from U.K. This site originally used a full range of plastic headrests in their radiotherapy treatments. However, there were some ...
-
Using Moldcare is helpful for the reduction of set up errors
This is a research paper using Moldcare (HN 0.5, 20cm x 15cm). This paper states using Moldcare is associated to a −52.3% (−73.7% - -11.2%) reduction of the set...
